help
sorry i wanna ask
how to save data logger with sd card module in arduino? and what i must add to my sketch?

my project for my final test, it is control lamp with esp8266, but have no data log, i wanna add data log with sd card module, thanks

my sketch

#include
#define DEBUG true

SoftwareSerial esp8266(6,7); // tx 6, rx 7

void setup()
{
Serial.begin(9600);
esp8266.begin(9600); // your esp’s baud rate might be different

pinMode(10,OUTPUT);
digitalWrite(10,HIGH);
pinMode(11,OUTPUT);
digitalWrite(11,HIGH);
pinMode(12,OUTPUT);
digitalWrite(12,HIGH);
pinMode(13,OUTPUT);
digitalWrite(13,HIGH);

/*
//PIN2
pinMode(2,OUTPUT);
digitalWrite(2, HIGH);
//PIN3
pinMode(3,OUTPUT);
digitalWrite(3,HIGH);
//PIN4
pinMode(4,OUTPUT);
digitalWrite(4,HIGH);
//PIN5
pinMode(5,OUTPUT);
digitalWrite(5,HIGH);
//PIN6
pinMode(6,OUTPUT);
digitalWrite(6,HIGH);
//PIN7
pinMode(7,OUTPUT);
digitalWrite(7,HIGH);
//PIN8
pinMode(8,OUTPUT);
digitalWrite(8,HIGH);
//PIN9
pinMode(9,OUTPUT);
digitalWrite(9,HIGH);
*/

// Reset modul
sendCommand(‘AT+RST\r\n’,2000,DEBUG);
// Konfigurasikan sebagai Akses poin
sendCommand(‘AT+CWMODE=3\r\n’,1000,DEBUG);
// Sesuaikan dengan SSID dan Password
sendCommand(‘AT+CWJAP=\’UBL Penguin\’,\’M4s1hY4ngL4m4#$\’\r\n’,10000,DEBUG);
// sendCommand(‘AT+CWJAP=\’panadol\’,\’cobaajadulu\’\r\n’,10000,DEBUG);
// Mendapatkan IP adress
sendCommand(‘AT+CIFSR\r\n’,1000,DEBUG);
// Konfigurasikan untuk multiple connection
sendCommand(‘AT+CIPMUX=1\r\n’,1000,DEBUG);
// Aktifkan server pada port 80
sendCommand(‘AT+CIPSERVER=1,80\r\n’,1000,DEBUG);

Serial.println(‘Arduino Siap’);

}

void loop()
{
if(esp8266.available()) // check if the esp is sending a message
{

if(esp8266.find(‘+IPD,’))
{
delay(1000); // wait for the serial buffer to fill up (read all the serial data)
// get the connection id so that we can then disconnect
int connectionId = esp8266.read()-48; // subtract 48 because the read() function returns
// the ASCII decimal value and 0 (the first decimal number) starts at 48

esp8266.find(‘pin=’); // advance cursor to ‘pin=’

int pinNumber = (esp8266.read()-48); // get first number i.e. if the pin 13 then the 1st number is 1
int secondNumber = (esp8266.read()-48);
if(secondNumber>=0 && secondNumber<=9)
{
pinNumber*=10;
pinNumber +=secondNumber; // get second number, i.e. if the pin number is 13 then the 2nd number is 3, then add to the first number
}

digitalWrite(pinNumber, !digitalRead(pinNumber)); // toggle pin

// build string that is send back to device that is requesting pin toggle
String content;
content = ‘Pin ‘;
content += pinNumber;
content += ‘ is ‘;

if(digitalRead(pinNumber))
{
content += ‘OFF’;
}
else
{
content += ‘ON’;
}

sendHTTPResponse(connectionId,content);

/*
//make close command
String closeCommand = ‘AT+CIPCLOSE=’;
closeCommand+=connectionId; // append connection id
closeCommand+=’\r\n’;

sendCommand(closeCommand,1000,DEBUG); // close connection
*/
}
}
}

/*
* Name: sendData
* Description: Function used to send data to ESP8266.
* Params: command – the data/command to send; timeout – the time to wait for a response; debug – print to Serial window?(true = yes, false = no)
* Returns: The response from the esp8266 (if there is a reponse)
*/
String sendData(String command, const int timeout, boolean debug)
{
String response = ”;

int dataSize = command.length();
char data[dataSize];
command.toCharArray(data,dataSize);

esp8266.write(data,dataSize); // send the read character to the esp8266
if(debug)
{
Serial.println(‘\r\n====== HTTP Response From Arduino ======’);
Serial.write(data,dataSize);
Serial.println(‘\r\n========================================’);
}

long int time = millis();

while( (time+timeout) > millis())
{
while(esp8266.available())
{

// The esp has data so display its output to the serial window
char c = esp8266.read(); // read the next character.
response+=c;
}
}

if(debug)
{
Serial.print(response);
}

return response;
}

/*
* Name: sendHTTPResponse
* Description: Function that sends HTTP 200, HTML UTF-8 response
*/
void sendHTTPResponse(int connectionId, String content)
{

// build HTTP response
String httpResponse;
String httpHeader;
// HTTP Header
httpHeader = ‘HTTP/1.1 200 OK\r\nContent-Type: text/html; charset=UTF-8\r\n’;
httpHeader += ‘Content-Length: ‘;
httpHeader += content.length();
httpHeader += ‘\r\n’;
httpHeader +=’Connection: close\r\n\r\n’;
httpResponse = httpHeader + content + ‘ ‘; // There is a bug in this code: the last character of ‘content’ is not sent, I cheated by adding this extra space
sendCIPData(connectionId,httpResponse);
}

/*
* Name: sendCIPDATA
* Description: sends a CIPSEND=, command
*
*/
void sendCIPData(int connectionId, String data)
{
String cipSend = ‘AT+CIPSEND=’;
cipSend += connectionId;
cipSend += ‘,’;
cipSend +=data.length();
cipSend +=’\r\n’;
sendCommand(cipSend,1000,DEBUG);
sendData(data,1000,DEBUG);
}

/*
* Name: sendCommand
* Description: Function used to send data to ESP8266.
* Params: command – the data/command to send; timeout – the time to wait for a response; debug – print to Serial window?(true = yes, false = no)
* Returns: The response from the esp8266 (if there is a reponse)
*/

String sendCommand(String command, const int timeout, boolean debug)
{
String response = ”;

esp8266.print(command); // send the read character to the esp8266

long int time = millis();

while( (time+timeout) > millis())
{
while(esp8266.available())
{

// The esp has data so display its output to the serial window
char c = esp8266.read(); // read the next character.
response+=c;
}
}

if(debug)
{
Serial.print(response);
}

return response;
}

Leave a Reply

Your email address will not be published. Required fields are marked *

Captcha loading...